Learn how to make an easy DIY blanket ladder using only 2 power tools! Build it in under an hour with the step by step plans and video!
supplies needed
Redwood boards
Miter Saw
Countersink drill bit
2-½″ screws
Drill/Driver
Wood Glue
Wood Putty
STEP 1 – MAKE THE CUTS
www.anikasdiylife.com
Using a miter saw, make the cuts per the plans
STEP 2 – LAYOUT THE LADDER
www.anikasdiylife.com
Layout the ladder on the floor. Adjust the distance between each of the rungs to ensure a tight fit.
STEP 3 – ATTACH THE RUNGS
www.anikasdiylife.com
Apply wood glue and attach each of the rungs to the sides. Pre-drill with a countersunk bit to make sure the screw sits below the surface of the board
Step 4 – ADD EXTRA SCREWS
www.anikasdiylife.com
A single screw can be a pivot point for the rung to rotate around.
Step 5 – FINISH
www.anikasdiylife.com
Patch and fill all the holes for the screws. After it has dried, sand it down. Apply a finish to the blanket ladder.
www.anikasdiylife.com
The DIY blanket ladder is ready!
Swipe up to learn how to make a DIY blanket ladder using only 2 power tools!