DIY Family Charging Station
With Wireless Charger!
If your charging area looks like this
You need this DIY charging station in your life!
Lumber per the plans
Miter saw or circular saw
Palm router and straight bit
3/4" Forstener bit
Finalize the Design
How many slots do you need for your devices? Make it larger or smaller to fit your needs.
Make the cuts for the boards following the plans
build the box
Attach the 3 sides to the bottom plywood piece.
add lid support
Attach the square dowels to each of the four corners using hot glue.
route for wireless charger
Make the plywood as thin as possible without compromising the integrity of the plywood
attach device supports
Attach the supports to the top making sure they are centered and straight.
add holes for wires
Make holes on the side of the box for the connectors.
Paint or stain and add power.
With this ONE project in just a couple of hours:
All your devices are stored neatly. You used up some scrap wood. And the cord clutter monster is GONE!
Swipe up for detailed plans and full tutorial to make your own