Learn how to build a DIY hexagon end table using a single 8 foot 1×10 board with step by step plans & video tutorial. OR build it using 1x2s – your choice! I have printable plans for both!

supplies needed

Lumber per the plans

Multi-mark tool

GRR-RIPPER push block

Miter Saw

Table Saw

Power Drill/Driver

Brad Nailer

STEP 1 – MAKE THE CUTS

www.anikasdiylife.com

Start by cutting off the part of the board that will make the table top.

STEP 2 – BUILD FRAMES

www.anikasdiylife.com

Build 6 frames using dowel joints. The dowel jig is simple and easy to use. Be sure to check out the video above to see exactly how I did it.

STEP 3 – CUT FRAMES

www.anikasdiylife.com

Set the table saw blade at a 30° angle. (Or 60° depending on the direction)

STEP 4 – GLUE UP THE FRAMES

www.anikasdiylife.com

Lay down masking tape and band clamp on the workbench and arrange the frames over them.

STEP 5 – CUT THE TOP

www.anikasdiylife.com

Use the bottom frame built in the above step as a guide to cutting out the shape of the top using a Jigsaw. There will be two halves.

www.anikasdiylife.com

Swipe up to learn how to make a DIY hexagon end table.