Learn how to make an easy DIY nightstand with drawers. A simple design perfect for beginners and looks like designer furniture! I have you covered with the full tutorial, plans, and video!
supplies needed
Lumber per plans
Kreg Jig
Kreg Corner Clamp
Pocket hole screws
Kreg Face Clamp
Power drill/driver
Drawer slides
Step 1: MAKE CUTS AND PREP BOARDS
www.anikasdiylife.com
Make all the cuts. Sand all the boards and remove any sanding dust. Decide how the boards will be laid out and drill pocket holes on one side of the end boards.
Step 2: ASSEMBLE THE PANELS
www.anikasdiylife.com
Edge join and assemble each side panel using wood glue and pocket hole screws.
Step 3: BUILD THE FRAME
www.anikasdiylife.com
Make pocket holes on both ends of the side panels. Assemble the box using wood glue and pocket hole screws.
Step 4: BUILD AND INSTALL DRAWERS
www.anikasdiylife.com
Build two drawers as per the plans. Install drawers in the frame.
Step 5: Build the nightstand legs
www.anikasdiylife.com
- Make the cuts. - Build the front and back leg frames. - Attach side aprons and build the frame.
Step 6 : DIY nightstand assembly
www.anikasdiylife.com
- Place the nightstand frame over the leg frame and ensure alignment. - Attach nightstand frame to the legs. - Place the drawers into the nightstand.
www.anikasdiylife.com
Swipe up to learn how to make a DIY Nightstand With Drawers.
The DIY Nightstand With Drawers is ready!