DIY PHONE STAND FOR DESK – USING SCRAP WOOD
It holds up your phone even while it’s charging and you can add a quote or picture next to it.
supplies needed
1″ x 12″ board cut at 10″
1″ x 2″ cut at 1.5″ – 2 of these – phone rest
Mini hinged clip
wood glue
1″ x 2″ cut at 5″ – back stand
1 ¼” spax wood screws
Super Glue
STEP 1 – ATTACH BACK SUPPORT
www.anikasdiylife.com
Start with the board for the back support. Make pocket holes and attach it using wood glue and pocket hole screws.
STEP 2 – ATTACH THE PHONE REST
www.anikasdiylife.com
Attach the two 1″ x 2″ for the phone rest on the front using wood glue.
STEP 3 – FINISH THE PHONE STAND
www.anikasdiylife.com
Lightly sand your piece and finish it using your choice of stain or paint.
Step 4 – ADD INTEREST (OPTIONAL)
www.anikasdiylife.com
To add some interest to the piece, I drew imperfect lines to create a “framed” look for the photograph
www.anikasdiylife.com
The DIY phone stand is ready!
Swipe up to learn how to make a DIY phone stand with space to add a quote or photograph using scrap wood.