Learn how to build a DIY tiered metal plant stand using aluminum brazing with a blow torch with detailed tutorial, video, and plans. It makes a great display for all your plants!

supplies needed

square aluminum tubes

1×8 boards

Bernzomatic Aluminum Brazing Rods

Flat metal file

Bernzomatic BZ8250HT Hose Torch

Wire brush

Acetone

STEP 1 – CUT THE ALUMINUM TUBES

www.anikasdiylife.com

Start by cutting the aluminum tubes per the plans.

STEP 2 – CLEAN AND PREPARE TUBES

www.anikasdiylife.com

Clean all the tubes with acetone to remove all the gunk and residues.

STEP 3 – SET UP THE JOINT

www.anikasdiylife.com

Set up the metal pieces you want to join and hold them together using a metal clamp. Be sure to use a speed square to keep everything square.

STEP 4: BRAZE!

www.anikasdiylife.com

This is the fun part! Although the technique is quite easy, as I mentioned before, it also takes a lot of patience.

STEP 5 – CLEAN AND PAINT

www.anikasdiylife.com

Clean the frame again with acetone to remove any dirt or oils from touching it. Prime and paint with the spray paint of your choice. I used a glossy black finish.

www.anikasdiylife.com

Swipe up to learn how to make a DIY Tiered Metal Plant Stand

The DIY Tiered Metal Plant Stand is ready!