This DIY Toy organizer is the toy storage solution you have been looking for! 

supplies needed

Lumber per the plans

Kreg Jig

Miter Saw

Drill

Circular Saw

1 ¼” finish nails

1 ¼” pocket hole screws

Step 1 – Attach rails

www.anikasdiylife.com

Make sure to measure the distances between the rails accurately as shown in the plans.

Step 2 – Attach shelves

www.anikasdiylife.com

On the other side piece, attach the center and bottom shelves.

Step 3 – Assemble basic frame

www.anikasdiylife.com

Attach the middle divider and the other side piece.

Step 4 – Attach top

www.anikasdiylife.com

Attach the top using pocket hole screws through the outside of the sides and the middle divider.

Step 5 – Attach trim

www.anikasdiylife.com

Use 1 ¼”pocket hole screws on the side trim pieces to attach them to the long trim pieces.

www.anikasdiylife.com

Swipe up to learn how to make a DIY Toy organizer.