The best part is that this bench is built from only two 2 x 4 boards making it really easy on the budget.

supplies needed

Lumber per the plans.

Miter Saw

pocket hole screws

Spax screws

Kreg Jig

Drill

Staple gun

STEP 1 – MAKE THE CUTS

www.anikasdiylife.com

Make the cuts per the cut list in the plans. I would recommend dry-fitting the cuts as you go to get the best possible fit.

STEP 2 – MAKE POCKET HOLES

www.anikasdiylife.com

Set the Kreg Jig and the drill bit collar at 1½” thickness and make all the pocket holes as shown in the plans.

STEP 3 – MAKE THE X’S FOR THE LEGS

www.anikasdiylife.com

Assemble the 2 side X’s using wood glue and 2  pocket hole screws.

STEP 4 – BUILD THE TOP FRAME

www.anikasdiylife.com

Build the frame using 2x4 boards using wood glue and  Pocket hole screws.

STEP 5 – ASSEMBLE THE BENCH

www.anikasdiylife.com

Attach the two X- legs to the frame.

www.anikasdiylife.com

Swipe up to learn how to make a UPHOLSTERED BENCH.