Learn how to make your own wall decals or custom wallpaper to customize any wall with Cricut machines. Here we use Maker 3, but you can use any Cricut machine.
supplies needed
Smart Vinyl of your choice
Cricut Maker 3
Cricut Transfer Tape
Fine point blade + housing
Cricut Smart Roll Holder
Weeding tool set
Access to Cricut Design Space
STEP 1 – THE DESIGN
www.anikasdiylife.com
Picking the design was probably the hardest part of this project. We ended up picking design but with only one set of arrows.
STEP 2 – MAKE THE CUT
www.anikasdiylife.com
I made the first cut. I cut the patterns in increments of 40-50 because I wasn’t sure how many I needed and didn’t want to waste too much of the vinyl.
STEP 3 – WEED THE DESIGN.
www.anikasdiylife.com
This can be very intimidating and really depends on the design you choose. I had about 7ft cuts, and it wasn’t that hard to weed the design.
STEP 4 – TRANSFER DESIGN
www.anikasdiylife.com
Once the design was ready, I applied transfer tape to the entire length.
STEP 5 – APPLY DESIGN
www.anikasdiylife.com
Remove the vinyl backing from the decal so the design is on transfer tape. Apply to the wall.
www.anikasdiylife.com
The Diy Wall Decals With Cricut is ready!
Swipe up to learn how to make a Diy Wall Decals With Cricut