Learn how to make a gorgeous DIY Mandala Tray using wood burning with a heat-sensitive pen and blowtorch. Its a quick project and takes a couple of hours!
Step 1 – Prep the tray
Sand the surface with a fine sanding sponge in the direction of the grain and wipe away all the dust.
Step 2 – Stencil
Decide on the positions of the patterns and lay the stencil on the tray. Attach the stencil to the tray using masking tape to keep it from moving.
Step 3 – Burn!
Lay the plank/wood tray on a few pieces of scrap wood elevated over a concrete or stone floor. Using a Bernzomatic BZ4500HS and propane, slowly torch from one end to the other.
Step 4 – Add the epoxy
Mix up the epoxy using directions on the package and pour it on top of the patterned side.
Step 5 – Pop the bubbles
Use a Bernzomatic ST2200 Detail Torch loaded with butane to pop all the bubbles in the epoxy.
Swipe up to learn how to make DIY Wood Burning Mandala Tray
The DIY Wood Burning Mandala Tray is ready