ANIKA'S DIY LIFE

We each built a secret project and then exchanged half way for the other to finish – without telling what it was meant to be.

This bench is a quick afternoon project. It’s a few simple cuts and can be made rather quickly.

Kids Bench

Step 1 – Prepare lumber

Step 2 – Build the side

Step 3 – Attach the rail

Attach the slats between the rails with 2-1/2″ pocket hole screws.

SWIPE UP TO LEARN MORE

OTHER PROJECTS

[{"selector":"#anim-17bf2993-a405-49c3-942d-a8d0f0dbd05d","keyframes":{"transform":["scale(1)","scale(1.15)","scale(0.985)","scale(1)"],"offset":[0,0.33,0.66,1]},"delay":0,"duration":1200,"easing":"ease-in-out","fill":"both","iterations":1}] [{"selector":"#anim-9a8a8719-0a50-4bd9-8783-de4951c3c249","keyframes":{"opacity":[0,1]},"delay":0,"duration":1200,"easing":"cubic-bezier(0.4, 0.4, 0.0, 1)","fill":"both"}] [{"selector":"#anim-9d2ea18f-cccd-473c-8eb6-4d3f85773ec6","keyframes":{"opacity":[0,1]},"delay":100,"duration":1201,"easing":"cubic-bezier(0.4, 0.4, 0.0, 1)","fill":"both"}] [{"selector":"#anim-5facbb04-16d3-4a31-ac42-acab0981dbb1","keyframes":{"opacity":[0,1]},"delay":200,"duration":1200,"easing":"cubic-bezier(0.4, 0.4, 0.0, 1)","fill":"both"}] DIY Outdoor Towel Rack with Shelve DIY kids bedside table $100 Kids Rental Bathroom Makeover

ANIKA'S DIY LIFE

Kids Bench

Modern DIY Kids Bench

We each built a secret project and then exchanged half way for the other to finish – without telling what it was meant to be.

This bench is a quick afternoon project. It’s a few simple cuts and can be made rather quickly.

Kids Bench

Step 1 – Prepare lumber

Make all the cuts per the plans. Make the pocket holes in the rails and the slats as shown in the plans.

Step 2 – Build the side

The sides are built using countersunk screws. They are simple rectangles. Make sure they are all square and level. It helps to use a speed square as you assemble.

Step 3 – Attach the rail

Attach rails between sides using pocket hole screws to complete the frame of the bench.

Attach the slats between the rails with 2-1/2″ pocket hole screws.

Step 4 – Attach the slat

SWIPE UP TO LEARN MORE

OTHER PROJECTS