After setting up the back patio with the curbside rescued patio set, it was time to think about a coffee table.
After a lot of thought, I came up with a simple and easy design which also cost only $15 in lumber!
Start by reviewing the plans and make all the cuts and pocket holes as shown in the printable plans.
Build the side leg frames using wood glue and 2 1/2″ exterior pocket hole screws. A right angle clamp is such a blessing to make these joints!
Attach the long aprons to create the table frame and the bottom support for added stability.
Attach the table top support slats using wood glue and 2 1/2″ pocket hole screws. This completes the assembly of the coffee table frame.
How to Build an Easy DIY Outdoor Dining Table
DIY Outdoor Towel Rack With Shelve