Plant Stand 

DIY Tiered Plant Stand 

I decided to build a tiered plant stand for some of my littlest pants!

Make the cuts


Start by making the cuts. For the 2″ x 2″ boards, measure and mark 2½” from the edge and draw a line from the opposite corner.

Attach legs to the main board


Attach the angled cut end of the legs to the 1″ x 6″ x 27″ front board using wood glue and 1 ¼” Spax screws.

Attach Shelve


Make two pocket holes in each 6″ shelf using a Kreg Jig. The long end of the cut will be facing you as you drill the 3/4″ pocket holes.



Fill the pocket holes with wood filler, sand, and finish with paint or stain. If you paint your shelf be sure to prime first.

Swipe Up For More!