Table Saw Stand: How to DIY One

I had stayed away from a table saw for a long time! But finally, it was time to step up my woodworking game!

Before I could buy and use a table saw, I tried to read everything I could about using it and about table saw safety.

Table Saw Stand: How to DIY One

Step 1- Make the Cuts and Prep

– Follow the printable plans and make all your cuts. – Review the plans and make pocket holes needed. Learn more

Step 2 – Build the Frame of the Table Saw Stand

– Build the frame of the table saw stand by attaching the 2x4s using 2-1/2″ pocket hole screws and wood glue. Learn more

Step 2: Set the Kreg 320 to Material Thickness

Use the material thickness and set it up on the jig using the two gray tabs on the back. Learn more

Step 3 – Add Shelves

Cut the plywood to size and screw it in using 1-1/4″ wood screws. I recommend using a straight edge jig or a Kreg Rip cut for this. Learn more

SWIPE UP TO LEARN MORE

MORE IDEAS

[{"selector":"#anim-c78b9350-7884-4c3e-881c-60c10ee63630","keyframes":{"opacity":[0,1]},"delay":0,"duration":1200,"easing":"cubic-bezier(0.4, 0.4, 0.0, 1)","fill":"both"}] [{"selector":"#anim-9ff4fad3-37d3-4157-b4ee-3f96ea5fd453","keyframes":{"opacity":[0,1]},"delay":100,"duration":1201,"easing":"cubic-bezier(0.4, 0.4, 0.0, 1)","fill":"both"}] [{"selector":"#anim-5b205587-97ae-4104-977f-7e3522a11ca1","keyframes":{"opacity":[0,1]},"delay":200,"duration":1200,"easing":"cubic-bezier(0.4, 0.4, 0.0, 1)","fill":"both"}] [{"selector":"#anim-4afe019a-8846-4eef-9d88-9b4affb416b5","keyframes":{"transform":["scale(1)","scale(1.15)","scale(0.985)","scale(1)"],"offset":[0,0.33,0.66,1]},"delay":0,"duration":1200,"easing":"ease-in-out","fill":"both","iterations":1}] How To Use A Miter Saw How to Use a Circular Saw Without a Table Must-Have Kreg Tools Accessories for Beginner Learn more