Share this post:

Pinterest Facebook X (Twitter) Email Flip it

Learn how to make a DIY Coffee filter holder using scrap wood which makes storage and dispensing of the filter easy!

You will also love the Easy DIY scrap wood projects and Quick and easy DIY Kitchen Ideas!

Hi everyone, my name is Toni.

My friend Anika invited me over today to share a fun project with you.

Recently I made a Coffee Filter Holder out of wood to solve a problem I was having. Even if you aren’t having the same issue, you can make this fun and easy beginner woodworking project in an afternoon. It will add a little style to your cabinet.

Nearly every day when I made coffee the box with the filters would flop over when I pulled down the canister.

Try as I might the wonky box kept falling so I decided I needed a cute coffee filter holder out of wood to solve the problem once and for all.

I love that I was able to make this project out of scrap wood so it really cost me nothing.

I try to use scrap wood before buying when possible, like when I made a Craft Vinyl Storage Rack for my office/craft room.

It drives my husband a little bonkers that I won’t throw away small scraps; but you never know when that small piece will come in handy for something.

***This post contains affiliate or referral links. It is a way for this site to earn advertising fees by advertising or linking to certain products and/or services. Please read my full disclosure here ***

Supplies for DIY Coffee Filter Holder

1/4″ thick Plywood cut as follows:
- 2 pieces 6-1/2″ wide x 6-1/2″ tall
- 1 piece 6-1/2″ x 2″
- 2 pieces 6-1/8″ x 2″
Wood Glue
Brad Nailer
Tape Measure
Miter Saw (Take a look at everything you need to know about using a miter saw!)
Jigsaw
Sanding block
Stain (if desired)

Shop my products –

How to Make a Coffee Filter Holder

I used the cardboard box as my guide to determine the measurements of the coffee filter holder.

Step 1: Cut the Plywood

Start by cutting the plywood on your miter saw as noted above.
Before assembly make an outline as shown on one end of one of the large boards. You can trace the box you have if needed.

Use a jigsaw to cut away the outlined wood. You can do so many cool things with a jigsaw, I made my mom a really cool Yarn Bowl last year.
Give the rough edges a good sanding with your sanding block.
Sand the rest of the tops and edges of the other plywood pieces.

Step 2: Assemble the box

When you’re ready to assemble the coffee filter holder use the cardboard box for support.

Apply a thin bead of wood glue to the long edge of the 6-1/2 x 2″ piece.
Place and hold the 6-1/2 x 6-1/2 board at a right angle to the 2″ piece.
Line up the edges and secure with the brad nailer on both ends.

Follow the same process with the two side pieces.

Apply wood glue to the three edges and affix the top of the box with the brad nailer.

Tip – Be sure to wipe away excess glue with a damp rag.

You’re all done and your new coffee filter holder is ready for paint or stain.

Just make sure the finish you use is food safe and that you allowed it to cure for the recommended length of time.

This functions and looks so much better that I had to get rid of that ugly old plastic canister.
I can’t believe I waited so long to make this!

If you don’t have room to store your coffee filters in your cabinet this one’s pretty enough to keep on the kitchen counter right next to the coffee pot.

Thanks for letting me share with you today, I hope you love this easy and very quick project.

Toni is a former IT Manager who is now exploring her creative side and sharing her DIY journey at Girl, Just DIY! She lives in Northern CA with her hubby where they’ve been DIYing their house for the past 20 years. Some of her favorite projects are the Dollar Store Glass Backsplash she added to her bathroom, and the L-Shaped Desk she installed in her office.

Shop My T-Shirt Designs –

More Like DIY Coffee Filter Holder

If you enjoyed this project, be sure to check out these projects below!