Learn how to use gel stain to easily update cabinets without any heavy sanding or stripping. The step-by-step tutorial and video show you how to update outdated cabinets quickly with this affordable idea.
Let’s talk about how to use gel stain over old cabinets.
In my recent bathroom refresh, the one thing that needed major help was the vanity.
It had a LOT of moisture damage. We don’t have a budget to change them out just yet. Plus the vanity has pretty good bones and the perfect amount of storage with the 3 drawers.
Truth is, I really wanted to paint them a fun color but that would simply not work with the tile in the shower and there was no way I was going to replace the tile.
To tie it in with the tile in the shower, I decided to go with dark brown stain.
Now restaining an existing cabinet meant having to sand it down first and nope, I was not doing that!
When I started looking into alternatives, I found gel stain!!!
Can I use gel stain over finished wood?
Yes, absolutely!! That is exactly what I did!! Plus I barely used a sanding block!! See below for the complete tutorial including a video!
***This post contains affiliate or referral links. It is a way for this site to earn advertising fees by advertising or linking to certain products and/or services. Please read my full disclosure here ***
What do you need to update cabinets without sanding –
- Gel Stain in color of your choice. I used this gel stain.
- Foam brushes
- 220 grit sanding block
- Tack cloth
- Nitrile gloves
- Wet wipes
- Top coat
- Masking tape
How to use gel stain over stained wood cabinets
I showed how to use the gel stain to update the cabinet door live on Facebook. Watch below. Detailed step by step tutorial follows below.
Updating Cabinets with gel stain –
- Remove all the knobs and take apart any removable parts of the cabinets. In my case, it was one door and three drawers. Make sure to label the location of each door or drawer so you don’t forget where it came from later.
- Start by wiping down the cabinets to remove all the dirt and grime it may have accumulated. I used a wet wipe to do this.
- Give the surface a very light scuff with the sanding block. You don’t need to sand a lot – just enough to create a light scuff. I talk more about this in the video above.
- Use a tack cloth to wipe away all the sanding dust from the surface.
- Use a foam brush to apply the gel stain in the direction of the wood grain. It won’t look too great after the first coat but after the second coat, it looks great! See the video for more details! Just make sure you the previous coat is dry to touch before adding a new one. Be sure to use nitrile gloves for this because you don’t want the stain on your hands. Yes, I did not and learned it the hard way 🙂
- Be sure to put down masking tape near the floor or the walls while you stain.
- Allow about 24 hours to dry and then add 2 coats of the high-performance top coat using a foam brush. This will add just the right amount of sheen and help protect the cabinet.
That’s it!! It really was that simple! It looks as good as new now!
You couldn’t even tell by looking at it that it was in such a bad state at some point. Plus I love that I didn’t have to use a lot of elbow grease!
Have you ever used gel stain before?
This was the first time I have used it and I must say I was quite impressed! I will surely be using it more and more!
Also, I am interestingly digging the “Java” color too. It is so rich and dark. Did you see the DIY floating ladder shelf I made to add storage to this bathroom?